近期论文 |
1, Weizhe Tang, Tong Zhao*, Rui Dou*, Li Wang*, Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration. Additive Manufacturing, 2022, Volume 59, 103168 2, Rui Dou*, Weizhe Tang, Kaixin Hu f*, Li Wang*, Ceramic paste for space stereolithography 3D printing technology in microgravity environment. Journal of the European Ceramic Society, 2022, Volume 42, 3968 3, Weizhe Tang, Tong Zhao*, Rui Dou*, Li Wang*, Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting. Ceramics International, 2022, Volume 48, 15218 4, H Li, Y Liu, Y Liu, R Dou*, et al. Influence of sintering temperature and CVI time on mechanical properties of 3D-printed alumina ceramics. Materials Letters, 2021, Volume 285, 15 5, S Li, Y Zhang, T Zhao, W Han, W Duan, L Wang, R Dou*, et al. Additive manufacturing of SiBCN/Si 3 N 4 w composites from preceramic polymers by digital light processing. RSC Advances, 2020, 10, 5681-5689 6, W Duan, S Li, G Wang, R Dou*, et al. Thermal conductivities and mechanical properties of AlN ceramics fabricated by three dimensional printing. Journal of the European Ceramic Society, 2020, Volume 40, Issue 10, 3535-3540 7, L Wang, X Liu, G Wang, W Tang, S Li, W Duan, R Dou*, et al. Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing. Materials Science and Engineering: A, 2020, Volume 770, 138537 8, X Yang, X Zhao, C Wang, Z Liu, R Dou*, et al. Superstretchable and processable silicone elastomers by digital light processing 3D printing. ACS Appl. Mater. Interfaces, 2019, 11, 15, 14391–14398 9, R Dou, WZ Tang, et al. Sintering of lunar regolith structures fabricated via digital light processing. Ceramics International, 2019, Volume 45, Issue 14, 17210-17215 10, M Liu, W Tang, W Duan, S Li, R Dou*, et al. Digital light processing of lunar regolith structures with high mechanical properties. Ceramics International, 2019, Volume 45, Issue 5, 5829-5836 11, S Li, T Zhao, W Han, L Wang, R Dou*, et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology. Journal of the European Ceramic Society, 2018, Volume 38, Issue 14, 4597-4603 12, L Wang, R Dou, et al. Subcritical crack growth behavior of a perovskite‐structured Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen transport membrane. International Journal of Applied Ceramic Technology, 2018, 15(1): 63-73 13, L Wang, R Dou*, et al. A case study of mechanical properties of perovskite-structured Ba0. 5Sr0. 5Co0. 8Fe0. 2O3− δ oxygen transport membrane. Journal of the European Ceramic Society, 2018, 38(2): 647-653 |
